Technical note: Update on response times, in-air measurements, and in situ drift for oxygen optodes on profiling platforms.

Bittig, Henry C. and Körtzinger, Arne (2017) Technical note: Update on response times, in-air measurements, and in situ drift for oxygen optodes on profiling platforms. Open Access Ocean Science, 13 (1). pp. 1-11. DOI 10.5194/os-13-1-2017.

[img]
Preview
Text
bittig and körtzinger 2017.pdf - Published Version
Available under License Creative Commons: Attribution 3.0.

Download (1379Kb) | Preview
[img] Archive
os-13-1-2017-supplement.zip - Supplemental Material
Available under License Creative Commons: Attribution 3.0.

Download (232Kb)

Supplementary data:

Abstract

Oxygen optode measurements on floats and gliders suffer from a slow time response and various sources of drift in the calibration coefficients. Based on two dual-O2 Argo floats, we show how to post-correct for the effect of the optode's time response and give an update on optode in situ drift stability and in-air calibration. Both floats are equipped with an unpumped Aanderaa 4330 optode and a pumped Sea-Bird SBE63 optode. Response times for the pumped SBE63 were derived following Bittig et al. (2014) and the same methods were used to correct the time response bias. Using both optodes on each float, the time response regime of the unpumped Aanderaa optode was characterized more accurately than previously possible. Response times for the pumped SBE63 on profiling floats are in the range of 25–40 s, while they are between 60 and 95 s for the unpumped 4330 optode. Our parameterization can be employed to post-correct the slow optode time response on floats and gliders. After correction, both sensors agree to within 2–3 µmol kg−1 (median difference) in the strongest gradients (120 µmol kg−1 change over 8 min or 20 dbar) and better elsewhere. However, time response correction is only possible if measurement times are known, i.e., provided by the platform as well as transmitted and stored with the data. The O2 in-air measurements show a significant in situ optode drift of −0.40 and −0.27 % yr−1 over the available 2 and 3 years of deployment, respectively. Optode in-air measurements are systematically biased high during midday surfacings compared to dusk, dawn, and nighttime. While preference can be given to nighttime surfacings to avoid this in-air calibration bias, we suggest a parameterization of the daytime effect as a function of the Sun's elevation to be able to use all data and to better constrain the result. Taking all effects into account, calibration factors have an uncertainty of 0.1 %. In addition, in-air calibration factors vary by 0.1–0.2 % when using different reanalysis models as a reference. The overall accuracy that can be achieved following the proposed correction routines is better than 1 µmol kg−1.

Document Type: Article
Funder compliance: info:eu-repo/grantAgreement/EC/FP7/633211; info:eu-repo/grantAgreement/EC/FP7/246777; info:eu-repo/grantAgreement/EC/FP7/312642
Research affiliation: OceanRep > GEOMAR > FB2 Marine Biogeochemistry > FB2-CH Chemical Oceanography
OceanRep > SFB 754 > A4
OceanRep > SFB 754
Kiel University
Refereed: Yes
Open Access Journal?: Yes
DOI etc.: 10.5194/os-13-1-2017
ISSN: 1812-0784
Projects: AtlantOS, remOcean, E-AIMS, SFB754, Future Ocean
Expeditions/Models/Experiments:
Date Deposited: 16 Jan 2017 08:51
Last Modified: 01 Feb 2019 14:59
URI: http://oceanrep.geomar.de/id/eprint/35667

Actions (login required)

View Item View Item

Document Downloads

More statistics for this item...